2024 Exmark LZS801GKA60RA1 60" Kawasaki

$15,499.00

$15,499.00

Key Features

Availability Brochure
Year2024
MakeExmark
ModelLZS801GKA60RA1 60" Kawasaki

Product Features

Description

With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.



Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders, and machine health status. Like our full lineup of zero-turn mowers, the Lazer Z S-Series offers unparalleled durability and precision maneuverability. Be sure to check out the rest of the Lazer Z family of mowers, like the Lazer Z X-Series zero-turn mowers.

Features
  • Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
  • Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
  • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
  • Starter: Electric
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Caster Forks: .50 in. thick caster yoke arms.
  • Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Drive Tires: 24 x 12-12, 4 ply Turf Master®
  • Parking Brake: Lever-actuated disc brake.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5 in. x 3 in. tubular steel.
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75 in.-diameter cutter housing with 25mm (.98 in.) diameter spindle shaft and splined blade driver.
  • Electrical: 12-volt battery with 15-amp alternator.
  • Standard Features: Engine hour meter and cup holder
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Power Components
  • Transmission Speeds: Infinitely Variable
  • Engine Brand: Kawasaki
  • Engine Model: FX801V
  • Engine Displacement: 852
  • Engine Series: V-Twin
  • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
  • Transmission: Hydrostatic
  • Engine Spec: FX801V-ES19-R
  • Engine Speed: 3,750 RPM
  • Drive: Hydro-Drive
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Air Filter: Heavy-duty canister air filtration system
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Fuel Type: Gas Carbureted
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Fuel Indicator: Yes - electronic Sender
  • Drive Wheel Release: Allows unit movement without engine running.
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Carb Compliant: No
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
Decks
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
  • Width / Cutting Deck: 60 in.
  • Deck Construction: 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
  • Cutting Heights: 1.0 in. (2.5 cm) to 5.5 in. (11.8 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's seat.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 20.50 in. Length
Dimensions
  • Width: 66.2 in. (168.1 cm)
  • Height: 70.5 in. (179.1 cm)
  • Length: 79.2 in. (211.1 cm)
  • Curb Weight: 1287
Lazer Z S-Series Accessories
  • Hitch: Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.
  • Harness Add-On Accessory Kit: Take the hassle out of dual accessory fit up with this add-on harness.
  • Black Side Bumper(requires 3231-7 & 104-8301): Black Side Bumper(requires 3231-7 & 104-8301
  • Extended Drive Levers: Improve your elbow room while you operate with extended drive levers.
  • Equipment Cover, Large: Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
  • Power Deck Lift: Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.
  • Floor Mat: Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).
  • Finish Cut Baffles: Maximize cut quality in the toughest conditions with this finish cut baffle kit.
  • Air Ride Suspension Seat: Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.
  • Full Suspension Seat: This low-profile, full- suspension seat enhances operator comfort and lumbar support by adjusting to individual weight.
  • White Non-Marking Side Bumper (requires 3231-7 & 104-8301): White Non-Marking Side Bumper(requires 3231-7 & 104-8301)
  • Sun Shade: Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
  • Hydro Maintenance Kit: Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
  • Anti-Scalp and Side Wear Bar: Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.
  • Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
  • Tractus Tire: Tractus Tire
  • 12-Volt Power Port: 12-Volt Power Port
  • Light Kit, LED (not compatible with TC26): Light Kit
  • Slope Sensor: Slope Sensor Kit
  • Jack Mount Receiver: Safely access the underside of your zero-turn mower's deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
  • Trash Container (Not compatible with 135-7320): Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.
NOTES:
N/A in California

Engine

Engine Manufacturer Kawasaki
Engine Type FX801V
Displacement 852cc

General

Transmission Hydro-Drive
Wheel Size 24 x 12-12, 4 ply Turf Master®
Fuel Capacity 12 gal. (45.4 L)

Deck

Deck Size 60 in.
Discharge Type Rear; Optional: Mulch

Shopping Tools